In-Ground Fence Staples

One of the biggest misconceptions about containment fence systems is that they need to be buried under the ground in order to work. Fortunately, this is not the case. Containment fence systems work above ground and underground. These fence staples allow you to secure the wire in place for easy installation.

Please note: If the area is heavily used by tractors, animals and vehicles etc, we recommend burying the wire 10-15cm underground to avoid any breaks in the wire. 

Each pack comes with 100 staples. 100 staples cover approximately 150m of wire. 


Installation Steps: 

Step 1. Prepare the area by mowing the grass as low as possible. You will need to place the wire directly on the ground to allow the grass roots to grow over the wire. 

Step 2. Set up your fence transmitter and run the wire to the desired boundary edge.

Step 3. Staple the beginning point.

Step 4. Continue to roll out the wire and place a staple in the ground every 1.5m. Do this until you return back to the twisted wire.

Step 5. Place staples on the twisted wire.

Step 6. Inspect the wire once it's all laid out to ensure the wire is touching the ground. You may need more staples in some areas.


  • 100 x Fence Staples