Additional Receiver Collar for the DogWatch BigLeash Vibration Remote Training Collar V-10

DogWatch BigLeash Vibration Remote Trainer (V-10) Additional Receiver Collar

The DogWatch BigLeash Remote Trainer is expandable up to 2 dogs. Add a second receiver collar to communicate with 2 dogs. Fits dogs above 5kg. 

Suitable Breeds

Suitable for dogs sensitive, deaf or hearing impaired dogs above 5kg.

How it Works

Adding a Second Collar to your DogWatch BigLeash Vibration Remote Trainer V-10

Your transmitter is pre-set for use with one dog but can easily be programmed for use with two dogs.

1. Before adding Collar 2 to the transmitter, charge it for at least 3 hours.
2. Make sure the transmitter and both the receivers (Collar 1 and Collar 2) are turned 'off'
3. With the transmitter and receivers turned off, hold down the (V) button for 10 seconds until the screen on the transmitter turns on.
4. Set the 'training level' to '2'
5. Press and hold down the Collar 2 button while turning the new receiver 'on' by aligning the receiver next to the transmitter at the alignment markers (located on the left side of the transmitter).
6. Continue to hold the receiver next to the transmitter at the alignment markers while holding down the Collar 2 button.
7. You will hear a series of beeps. When the series of beeps stop, move the receiver away from the transmitter.
8. The second receiver is now programmed to the Collar 2 setting.
9. Turn the transmitter and receiver 'on' in the usual way to use.

Full DogWatch BigLeash Remote Training Collar V-10 Product Manual