The Dogtra YS600 delivers a static correction at the level you set. Simply turn the dial on the top of the module to the level you want.

There are three distinct modes of operation that the collar can be set to: 

10 static Electric Stimulation Levels (1-10)

When your dog begins to bark the collar will vibrate once followed by stimulation when your dog barks. On this mode, the collar starts at the lowest stimulation level and increases one level at a time when your dog barks within 15 seconds of the previous bark. After 15 seconds of silence, the collar resets to level 1. This mode makes it is easy to find the right stimulation for your dog and its temperaments.

Vibration/Paging Option (P)

On this mode, the collar will vibrate twice when your dog barks and has a more vibrant sensation than any traditional pager.

Test Mode (T)

This mode allows you to test to see if the collar is working properly, by vibrating once activated, using the cap end of a ballpoint pen and scratch between the contact points.

Rapid Charge Battery

The Dogtra YS600 has an improved rapid-charge battery that only requires a 2-hour charge which lasts approximately 4 weeks with average use. The battery indicator light appears green when the charge is full, amber when the charge is starting to decrease and red when the collar needs to be charged immediately. The indicator light will flash every 4 seconds when the collar is turned on. The collar goes into sleep mode after 30 seconds of silence - this will also turn off the battery indicator.

Persistent Bark Indicator

A new feature of the YS600, when turning the module off, if the indicator light flashes green for 10 seconds, this means that persistent activation had been recorded. This could be caused by a loose fit or by the correction level being set too low for your dog's drive.